1 in thick insulation blanket, 52 in wide x 70 in long, 5 straps, double D-rings
1 in thick insulation blanket, 52 in wide x 70 in long, 5 straps, double D-rings
1 in thick insulation blanket, 52 in wide x 70 in long, 5 straps, double D-rings
1 in thick insulation blanket, 52 in wide x 70 in long, 5 straps, double D-rings
1 in thick insulation blanket, 52 in wide x 70 in long, 5 straps, double D-rings
1 in thick insulation blanket, 52 in wide x 70 in long, 5 straps, double D-rings
1 in thick insulation blanket, 52 in wide x 70 in long, 5 straps, double D-rings
1 in thick insulation blanket, 52 in wide x 70 in long, 5 straps, double D-rings
1 in thick insulation blanket, 52 in wide x 70 in long, 5 straps, double D-rings
1 in thick insulation blanket, 52 in wide x 70 in long, 5 straps, double D-rings
An example of our acoustical blankets.
An example of our fabricated scaffold protection.
An example of our fabricated scaffold protection.
Annealing Seal
Annealing Seal
Annealing Seal
Annealing Seal
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
1/2" thick beehive • 32" wide x 48" long x 18" high • No thermocouples • No bottom
An example of our fabricated braided seal.
An up-close look at one of our custom fabricated braided seal
Examples of our custom fabricated braided seals
An example of our braided seal wrapped tightly around a tube
40" x 56" curtain with pipe hem on 40" side to slip over 1" rod • Made with 3200 SRC gray fabric
40" x 56" curtain with pipe hem on 40" side to slip over 1" rod • Made with 3200 SRC gray fabric
40" x 56" curtain with pipe hem on 40" side to slip over 1" rod • Made with 3200 SRC gray fabric
40" x 56" curtain with pipe hem on 40" side to slip over 1" rod • Made with 3200 SRC gray fabric
40" x 56" curtain with pipe hem on 40" side to slip over 1" rod • Made with 3200 SRC gray fabric
40" x 56" curtain with pipe hem on 40" side to slip over 1" rod • Made with 3200 SRC gray fabric
40" x 56" curtain with pipe hem on 40" side to slip over 1" rod • Made with 3200 SRC gray fabric
Scratch protection, an example of our fabrication.
An annealing seal, an example of our fabrication.
Pipe wrap insulation, an example of our fabrication.
An air cool cover, an example of our fabrication.
A dust cover, an example of our fabrication.
An expansion joint, an example of our fabrication.
A drop sleeve, an example of our fabrication.
A cable jacket, an example of our fabrication.
An insulated box with pads, an example of our fabrication.
Boom truck covers, an example of our fabrication
 Resized.jpg "Custom Fabrication")
Beehive cover, an example of our fabrication
 Resized.jpg "Custom Fabrication")
Boot cover, an example of our fabrication.
An oil can cover, an example of our fabrication.
A donut with wire mesh, an example of our fabrication.
A donut without wire mesh, an example of our fabrication.
Custom fabricated pads made for standing, kneeling, and laying for any length of time
An example of our custom fabrication
An example of our custom fabrication
An insulated pad with straps, an example of our custom fabrication
An example of a custom fabricated sleeve
An example of a custom fabricated sleeve
An example of our custom fabrication
An example of our custom fabrication
An example of our custom fabrication
An example of our custom fabrication
An example of our custom fabrication
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our custom fabrication.
An example of our die cutting.
An example of our die cutting.
An example of our die cutting.
Examples of our die cutting.
An example of our die cutting.
An example of our expansion joints.
40" long x 16" high x 1" thick silica fabric cover with 3 straps and d-rings for wrapping around 8.625" OD reaction tube
40" long x 16" high x 1" thick silica fabric cover with 3 straps and d-rings for wrapping around 8.625" OD reaction tube
40" long x 16" high x 1" thick silica fabric cover with 3 straps and d-rings for wrapping around 8.625" OD reaction tube
40" long x 16" high x 1" thick silica fabric cover with 3 straps and d-rings for wrapping around 8.625" OD reaction tube
40" long x 16" high x 1" thick silica fabric cover with 3 straps and d-rings for wrapping around 8.625" OD reaction tube
40" long x 16" high x 1" thick silica fabric cover with 3 straps and d-rings for wrapping around 8.625" OD reaction tube
40" long x 16" high x 1" thick silica fabric cover with 3 straps and d-rings for wrapping around 8.625" OD reaction tube
1/2" x 6" x 11.5" top cover with added 5.5" fabric and velcro flap to make an insulated wrap. Wrap is made eith ENM-12 (e-glass) and 1700 SRC on one side
Our 17 oz silicone fiberglass fabric • Temperature Range: -70°F to 500°F • Base Fabric: 1,000°F; Coating: 500°F
Our 32 oz silicone fiberglass fabric • Temperature Range: -70°F to 500°F • Base Fabric: 1,000°F
Our aluminized fiberglass fabric • Temperature Resistance: Service Temperature = 300°F - 350°F
(aluminized face) • Base Cloth Temperature Resistance: 1,000°F
Our aluminized fiberglass fabric • Temperature Resistance: Service Temperature = 300°F - 350°F (aluminized face) • Base Cloth Temperature Resistance: 1,000°F
Our GR2-SRC fiberglass fabric • Temperature Resistance:Silicone Coating 500°F
Our GR4E fiberglass fabric • Temperature Resistance: 1,022°F • Melting Temperature: 1,544°F
Our kevlar fiberglass fabric • Temperature Resistance:600°F
Our PS-3500 fiberglass fabric • Temperature Resistance: 1,000°F
Our PS-2800 E fiberglass fabric • Temperature Resistance: -40°F to +300°F coating
Our PTFE fiberglass fabric • Temperature Resistance: Service Temperature = -67°F to 600°F
Our 1400 V silica fabric • Temperature Resistance:
1,800°F
Our 1400 without coating silica fabric • Temperature Resistance: 1,800°F
Our 1800 silica fabric • Temperature Resistance: 1,800°F • Melting Temperature: 3,000°F
Our PS-3600 silica fabric • Temperature Resistance: 1,800°F
Our PS-HB-32 Herringbone silica fabric • Melting Temperature: 3,000°F; Continuous: 1,900°F
Fabric with grommet and ring
Fabric with grommet and ring
Fabrics with grommets and rings
Fabrics with grommets and rings
Our BB Board wrapped around a tube
 resized.jpg "Furnace Modules")
An example of our stacked furnace module made with our silica needled mat. All modules are made with our snm and can come with or without hardware.
An example of our stacked furnace module made with our silica needled mat. All modules are made with our snm and can come with or without hardware.
An example of our accordion furnace module with hardware. All modules are available with and without hardware.
High temp insulation exhaust pads • made with lacing anchors • Steady state operating temp of 1,800°F
High temp insulation exhaust pads • made with lacing anchors • Steady state operating temp of 1,800°F
An example of our high temp induction sleeve.
An example of our induction blankets.
An example of our induction blanket with tabs.
An up close picture of our induction blanket with tabs.
An example of our induction blanket with tabs.
An example of our induction blanket with tabs.
An example of our induction blanket with tabs.
An example of our induction blanket with tabs.
An example of our induction blanket with tabs.
Removable induction furnace with tabs for induction coils up to 80 ft • Will be exposed to temps up to 1,300°F • Will be powered by a Proheat 35
Removable induction furnace with tabs for induction coils up to 80 ft • Will be exposed to temps up to 1,300°F • Will be powered by a Proheat 35
Removable induction furnace with tabs for induction coils up to 80 ft • Will be exposed to temps up to 1,300°F • Will be powered by a Proheat 35
Removable induction furnace with tabs for induction coils up to 80 ft • Will be exposed to temps up to 1,300°F • Will be powered by a Proheat 35
Removable induction furnace with tabs for induction coils up to 80 ft • Will be exposed to temps up to 1,300°F • Will be powered by a Proheat 35
1/2" x 6" x 11.5" top cover with added 5.5" fabric and velcro flap to make an insulated wrap. Wrap is made eith ENM-12 (e-glass) and 1700 SRC on one side
1/2" x 6" x 11.5" top cover with added 5.5" fabric and velcro flap to make an insulated wrap. Wrap is made eith ENM-12 (e-glass) and 1700 SRC on one side
1/2" x 6" x 11.5" top cover with added 5.5" fabric and velcro flap to make an insulated wrap. Wrap is made eith ENM-12 (e-glass) and 1700 SRC on one side
1/2" x 6" x 11.5" top cover with added 5.5" fabric and velcro flap to make an insulated wrap. Wrap is made eith ENM-12 (e-glass) and 1700 SRC on one side
1/2" x 6" x 11.5" top cover with added 5.5" fabric and velcro flap to make an insulated wrap. Wrap is made eith ENM-12 (e-glass) and 1700 SRC on one side
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
2" blanket, 22" x 180", Made with HB Herringbone 32 silica on both sides and 1" silica
1 in thick insulation blanket • 3 ft x 2 ft • encapsulated blanket
1 in thick insulation blanket • 3 ft x 2 ft • encapsulated blanket
1 in thick insulation blanket • 3 ft x 2 ft • encapsulated blanket
Insulation blanket
Insulation blanket
Insulation blanket
Insulation blanket
Insulation blanket
Insulation blanket
1 in thick insulation blanket • 48 in round blanket • No cut outs
1 in wide x 48 in long straps with d-rings on one end • 1 in thick insulation blanket
1 in thick insulation blankets
1" thick insulation jacket, made into 5 separate pieces (one blanket per flange and a 3 blanket set for the body) • Flange 1: 2.14" x 11" • Flange 2: 2" x 11" • Body blankets 20.50" x 5.5" with cutouts to allow heating bands to clearance
1" thick pads made with 3600 silica fabric on the outside • 1" x 24" x 120" • stabilizing pins and grommets
1" thick pads made with 3600 silica fabric on the outside • 1" x 24" x 120" • stabilizing pins and grommets
1" thick pads made with 3600 silica fabric on the outside • 1" x 24" x 120" • stabilizing pins and grommets
1" thick pads made with 3600 silica fabric on the outside • 1" x 24" x 120" • stabilizing pins and grommets
1" thick pads made with 3600 silica fabric on the outside • 1" x 24" x 120" • stabilizing pins and grommets
A multi-layered blanket we fabricated with our HB32 silica fabric and d-rings.
An example of our removable insulation blankets.
An example of our removable insulation blankets.
An example of our removable insulation blankets.
An example of our removable insulation blankets.
An example of our removable insulation blankets.
An example of our removable insulation blankets.
An example of our removable insulation blankets.
An example of our removable insulation blankets.
An example of our removable insulation blankets.
Sample straps, 2" wide straps fabricated with our 3200 and our GR2-SRC fabrics
Sample straps, 2" wide straps fabricated with our 3200 and our GR2-SRC fabrics
Sample straps, 2" wide straps fabricated with our 3200 and our GR2-SRC fabrics
Sample straps, 2" wide straps fabricated with our 3200 and our GR2-SRC fabrics
Sample straps, 2" wide straps fabricated with our 3200 and our GR2-SRC fabrics
Sample straps, 2" wide straps fabricated with our 3200 and our GR2-SRC fabrics
Sample straps, 2" wide straps fabricated with our 3200 and our GR2-SRC fabrics
Sample straps, 2" wide straps fabricated with our 3200 and our GR2-SRC fabrics
Our sleeve fabricated with our 32 oz fiberglass fabric.
Our sleeve fabricated with our Kevlar fiberglass fabric.
An example of our fabricated sleeves.
Our fabricated sleeve with an insulated inside and an aluminized outside.
Our sleeve fabricated with our GR2-SRC fiberglass fabric.
Our sleeve fabricated with our PTFE fiberglass fabric.
Our tadpole fabricated with our 1400 silica and a wire mesh bulb.
Our tadpole fabricated with our herringbone silica fabric and a wire mesh bulb.
Our tadpole fabricated with our Kevlar fiberglass fabric and a wire mesh bulb.
Our tadpole fabricated with our GR2-SRC fiberglass fabric and a wire mesh bulb.
Our tadpole fabricated with our 1400 silica, an aluminized tail, and a silica needled mat bulb.
Our tadpole fabricated with our Kevlar fabric and a silica needled mat bulb.
Our tadpole fabricated with our GR2-SRC and a silica needled mat bulb.
Our tadpole fabricated with our herringbone silica fabric and a silica needled mat bulb.
Gasket, degasser, tadpole type • 8 ft long • 1.5 in diameter • 1 in long tail • silica material • 2,100°F operating temp • 3,000°F max temp
Gasket, degasser, tadpole type • 8 ft long • 1.5 in diameter • 1 in long tail • silica material • 2,100°F operating temp • 3,000°F max temp
Gasket, degasser, tadpole type • 8 ft long • 1.5 in diameter • 1 in long tail • silica material • 2,100°F operating temp • 3,000°F max temp
Gasket, degasser, tadpole type • 8 ft long • 1.5 in diameter • 1 in long tail • silica material • 2,100°F operating temp • 3,000°F max temp
Gasket, degasser, tadpole 8 ft long, silica material • 1.5 in diameter x 1 in long tail • 2,100°F operating temp • 3,000°F max temp
Gasket, degasser, tadpole 8 ft long, silica material • 1.5 in diameter x 1 in long tail • 2,100°F operating temp • 3,000°F max temp
Gasket, degasser, tadpole 8 ft long, silica material • 1.5 in diameter x 1 in long tail • 2,100°F operating temp • 3,000°F max temp
Gasket, degasser, tadpole 8 ft long, silica material • 1.5 in diameter x 1 in long tail • 2,100°F operating temp • 3,000°F max temp
Head thermal protection insulation blanket set • Consists of 1 head insulation sleeve, head j box insulation cover, 1 in thick insulation blanket, and j box cover with straps and gator clips
Head thermal protection insulation blanket set • Consists of 1 head insulation sleeve, head j box insulation cover, 1 in thick insulation blanket, and j box cover with straps and gator clips
Head thermal protection insulation blanket set • Consists of 1 head insulation sleeve, head j box insulation cover, 1 in thick insulation blanket, and j box cover with straps and gator clips
Head thermal protection insulation blanket set • Consists of 1 head insulation sleeve, head j box insulation cover, 1 in thick insulation blanket, and j box cover with straps and gator clips
Head thermal protection insulation blanket set • Consists of 1 head insulation sleeve, head j box insulation cover, 1 in thick insulation blanket, and j box cover with straps and gator clips
Head thermal protection insulation blanket set • Consists of 1 head insulation sleeve, head j box insulation cover, 1 in thick insulation blanket, and j box cover with straps and gator clips
Head thermal protection insulation blanket set • Consists of 1 head insulation sleeve, head j box insulation cover, 1 in thick insulation blanket, and j box cover with straps and gator clips
Head thermal protection insulation blanket set • Consists of 1 head insulation sleeve, head j box insulation cover, 1 in thick insulation blanket, and j box cover with straps and gator clips
Our welding chair is designed for welding in places that are too hard to otherwise reach, or when welding in an uncomfortable environment.
Our welding chair is comfortable, durable, covered in high temperature resistant material, and can endure temperatures up to 2,300°F.
Our welding chair is easy to customize, as it can be made with or without Stainless Steel (ss) wheels.
Our welding chair is fabricated to YOUR specific preferences.
 resized.jpg)
